Directions Must be poured into a separate container to avoid contamination Ensure surfaces treated are free from oil and grease and remove any loose rust Wash off any salt deposits with water and dry fully before application of Rust Converter Using a brush roller or spray max 44 psi apply thinly and evenly Avoid drips and runs The Rust Converter is not a paint therefore treated surfaces should be painted within 48 hours Do not use paints with a high zinc content Rust Converter is ready for over painting when a blueblack colouring appears approx 3 hours Do not wash treated surfaces with water unwanted splashes of the product may be removed with methylated spirits or water but only before the reaction time Store and use only in a plastic container Application and storage tem perature 0 to 40 C 32 to 104 F Do not store or use in direct sunlight or on hot surfaces protect from frost Shelf life is 1 year CE RJ PHG 250 0902 Copyright 2002 by Wurth 14 0231 Rust Converter Art No 893110 1 Litre Dispersion based Rust Converter Rust Converter neutralizes the cor rosion process by converting rust and ferrous oxides into a stable and insoluble blueblack Metalloorganic complex Features May be painted over and filled after the reaction time 3 hours Not harmful to the environment A fter the reaction time of 3 hours the surface may be over painted with any commercial paint systems or with the underbody protection systems May also be filled with polyester fillers Applications Trunks Wheel Wells Pillars Pinch Welds Contains a creeping agent ideal for hard to reach areas of contamination