CE WH PHG 250 1108 Copyright 2008 by Wurth 14 0149 Wurths High Pressure SnapIn Valve Stems have been manufactured with a unique collar design at the base of the brass insert which anchors the brass into the rubber base The collar is inside of the tire making it impossible for the brass to blow out during severe hot or cold temperatures Wurth valves are manufactured using only the highest quality materials Made of EPDM rubber the valve base will not crack split or weather check due to ozone and harsh environmental conditions as do competitive products WURTH HIGH PRESSURE SNAPIN VALVES STANDARD HIGH PRESSURE SNAPIN VALVES Collar at base of brass insert inside tire Will not blow out in severe heat or cold Tubeless SnapIn Type Valves For Use to 65 PSI Cold Inflation Pressure Maximum Tire and Rim Association Standard R ecommended maximum rim thickness at valve hole for the above snapin type valves is 0156 For usage beyond this limit consult valve manufacturer V alve holes for the above valves must conform to standards V alve core for 879413 TR C1 In the case of applications above 210 kmh 130 mph it is recommended to use a clampin valve instead of snapin valve Tubeless SnapIn Type Valves For Use to 100 PSI Cold Inflation Pressure Maximum Tire and Rim Association Standard R ecommended maximum rim thickness at valve hole for the above snapin type valves is 0205 For usage beyond this limit consult valve manufacturer V alve holes for the above valves must conform to standards Not to be used with metal valve extensions V alve core TR C1 In the case of applications above 210 kmh 130 mph it is recommended to use a clampin valve instead of snapin valve Art No Valve Hole Dia B Max C Max D Max 879413 0453 066 078 125 879414 0453 066 078 150 879415 0453 879418 0453 066 078 200 879423 0453 Art No Valve Hole Dia C Max D Ref E F Max G Max 879600 0453 069 127 079 032 054 879602 0453 069 200 152 032 054 No Collar Straight Brass Insert