CE RD PHG 250 0604 Copyright 2010 by Wurth 07 0065 Zinc 300 Art No 892200 500 ml P rovides good protection against corrosion from atmospheric influences R esistance up to approximately 300 C Visually identical to hot galvanising T wo or three coats on the repaired surface will provide the required layer of thickness according to DIN 50976 Fast drying dust dry after approximately 15 minutes fully dry after approximately 23 days S urface has to be dust grease and rust free according to DIN 55928 up to the derusting degree SA 25 and must also be dry Application The layer thickness of the repair film should be 15 times that of hot galvanising The repair coat should overlap the hot galvanising area by at least 1 cm C an be welded through C an be applied with a paint gun airless or with a brush C annot be overpainted Application area S teel construction ship building forging locksmiths and vehicle building