a Go to Main Menu Imager Trigger and select Internal b Set the Trigger Interval as desired The iVu Emulator will run with the saved configuration from Step 6 using the saved Inspection Logs from Step 7 as images 8 Make the desired adjustments 9 Close the iVu Emulator program All configuration changes will be saved to the CONFIGCFG file 10 Copy the sensor configuration that is CONFIGCFG from the PC working directory to the USB Thumb Drive for example USB BANNERmyNameCONFIGCFG 11 Remove the USB Thumb Drive from the PC and connect to the sensor 12 Restore the configuration to the sensor a Go to Main Menu System Sensor Configuration Load from USB b Select the Configuration to restore c Click the Load button to start the restore sensor configuration You will need to reboot the sensor when the restore is complete 612 How to Debug Using the Emulator from the USB Flash Drive 1 Plug a USB Thumb Drive into the sensor 2 Save Inspection Logs to the sensor a On the Main Menu Inspection Logs View Logs screen click the Save icon to save the inspection logs b When prompted select Yes to save sensor configuration along with the Inspection Logs The location of these files on the USB Thumb Drive will be displayed after the operation is completedthe Inspection Logs are saved in USBBANNER SENSORNAMEInspLog and the sensor configuration is saved in USBBANNERSENSORNAME For example if the sensor name is myName Configuration File CONFIGCFG path USBBANNERmyName Inspection Logs path USBBANNERmyNameInspLog NOTE If the sensor has no name the folder name is the first 8characters of the serial number 3 Remove the USB drive from the sensor and insert it into an available USB port on a Windows PC that has the iVu Emulator instal led 4 Copy the iVuEmulatorexe program file to the USB Thumb Drive in the same location as the CONFIGCFG file for example USBBANNERmyName 5 Launch the USBBANNERmyNameiVuEmulatorexe program 6 Set the Trigger option to Internal a Go to Main Menu Imager Trigger and select Internal b Set the Trigger Interval as desired The iVu Emulator will run with the saved configuration using the saved Inspection Logs as images 7 Make the desired adjustments 8 Close the iVu Emulator program All configuration changes will be saved to the CONFIGCFG file 9 Remove the USB Thumb Drive from the PC and connect to the sensor 10 Restore the configuration to the sensor a Go to Main Menu System Sensor Configuration Load from USB b Select the Configuration to restore c Click the Load button to start the restore sensor configuration You will need to reboot the sensor when the restore is complete iVu Plus Users Manual 72 wwwbannerengineeringcom tel 7635443164 Online Only rev A