The field of view FOV is the area that the sensor can see at the working distance The working distance is the distance from the sensors lens cover to the part being inspected By default the field of view FOV is the entire sensor display The FOV can be reduced in order to speed up the processing time of an inspection or to decrease background noise Gain Screen Main Menu Imager Gain Gain is an electronic boost to the image signal Increasing Gain by using the right arrow key or moving the slider to the right increases image brightness without increasing exposure time Note that Gain brightens both the light pixels and dark pixels and may reduce the image quality Internal Strobe Screen Main Menu Imager Strobe Internal The Internal Strobe setting configures the operation of the integrated ring light Setting options are Always ON Always OFF or Exposure Based If Exposure Based is selected then the ring light is on during the time the sensor is capturing an image iVu Plus Users Manual 32 wwwbannerengineeringcom tel 7635443164 Online Only rev A