S e c t i on3 - P a ge2 May 2013 Installation Accessories Cable Bolts End Holding Device - Conventional Style • to hold cable bolt prior to gr outing • 2 straps 3 / 4 " x 2 3 / 4 " (19 mm x 70 mm) • suitable for 2 " (51 mm) to 2.5" (64 mm) hole • can be or der ed separately and site installed • if factory or der ed, straps r emoved for shipping • not available for double cable bolts End Holding Device - Fish Hook Style • hooks swaged on with steel tubing • hooks can be bent out to accommodate any hole size • for single or double cable bolts • ftting holds double cables together 0.5", 0.6" 0.7" Machined Cable Grip - to fasten Plates • rated for full load of cable bolt • O 1 1 / 4 " (32 mm) for 0.5" cable bolts • O 1 1 / 2 " (38 mm) for 0.6" cable bolts • c/w 2 part gripper wedges • available galvanized • optional plastic cap to secur e wedges during shipping 0.6" 0.7" Cast Domed Cable Grip - to fasten Plates • rated for full load of cable bolt • O 2 " (51 mm) domed face • c/w 2 part gripper wedges • wedges available with or without gr oove r etaining spring • available galvanized • optional plastic cap to secur e wedges during shipping www .dsiundergr ound.com